tabber feeders

TA-FDR25 feeder

The dedicated feeder for the TA-25 tabber, the TA-FDR25 moves mailpieces into tabbing and stamp-affixing jobs with better alignment and automatic tabber control.

Parlez à un expert Download user guide

See how the TA-FDR25 fits your TA-25 setup.

Why the TA-FDR25?

Keep mail pieces aligned and reduce setup time for tabbing and stamping jobs.

Dedicated fit: Built as the optional feeder for the Quadient TA-25 tabber.
Automatic control: Let the TA-25 control feeder operation during tabbing jobs.
Manual flexibility: Adjust feeder speed directly when operator control is needed.
Thicker mail support: Use thickness adjustment for heavier mailpieces.

A cleaner feed for faster tabbing

Use the dedicated feeder to move mailpieces into TA-25 tabbing and stamp-affixing jobs with smoother setup and less operator intervention.

Feed pieces more accurately

Keep mailpieces aligned as they enter the TA-25 for smoother tabbing and stamp-affixing jobs.

Reduces manual control

Let the TA-25 start and control the feeder automatically during production.

Handles thicker media

Operators can adjust the feeder exit rollers for thicker mailpieces.

Support more tabbing jobs

Pair with the TA-25 to apply side tabs, front tabs and stamps across different mailpiece formats.

Tableau comparatif

Voyez comment le TA-FDR25 améliore la configuration des onglets

Capacité	Alimentation manuelle ou configuration de base pour alimentation	Quadient TA-FDR25
Alimentation régulière des médias	❌	✅
Contrôle automatique des alimentateurs par le TA-25	❌	✅
Soutien de l’alignement pour un bon réglage	❌	✅
Réglage du rouleau de sortie pour les cottes de mailles plus épaisses	❌	✅

Specifications at a glance

Specs sourced from the official Quadient TA-25 user guide, which documents the TA-FDR25 feeder setup, controls, cabling, and compatible TA-25 system specifications.

Feature	Details
Product type	Optional feeder for TA-25 tabber
Control modes	Automatic or manual
Automatic mode	TA-25 controls feeder operation
Manual mode	Feeder speed controlled by feeder speed knob
Media adjustment	Exit roller adjustment for thicker media
Alignment	Alignment pin and fixed non-operator-side media guide
Feeder interface cable	35E-500-190 included with feeder for TA-FDR25 to TA-25
System configuration cable	35E-500-197 available for TA-FDR25, TA-25, and AS-850 or AS-980 printer
Power requirement	115 Volt AC, 50/60 Hz grounded outlet
TA-25 supported media size	3.5" x 5" minimum; 15" x 11" maximum
TA-25 max media thickness	1/4"
TA-25 production rate	Up to 25,000/hour with one tab, 15,000/hour with two tabs, 10,000/hour with three tabs